Effective anti‑corrosion treatment is vital!
The anti-corrosion protection of a trailer is essential, you cannot simply do it 'again', it has to be done right first time! It is the main protection of the chassis and therefore extends its service life.
We have invested heavily in a 250-meter-long ‘street’ in which all phases are followed one by one, without interruption. Suspended, the trailer is piloted through the 6 phases. This makes it possible to treat any place on the trailer.
But there are even more benefits! Not only do we get better access to every corner of the trailer, it also means a better working environment for our employees; both benefit the preservation of the trailer! Come and visit us to view this unique process.
A closed process
Your trailer remains in the process without interruption and is not therefore exposed to the influence of weather and dirt from outside.
Working with a WallMan is safe for our colleagues and in this way the body sprayer is able to apply the right rustproofing treatment to your trailer.
Suspended on the side
Your trailer proceeds suspended through the entire paint system. In this way paint can be applied to every part. All sides can be treated easily.
Number 1 quality
By treating your semi-trailer in this way, we can say with confidence that we are also the leaders in the application of rustproofing treatment. Even the Army say so!
treatment step by step
1. Shot blasting
By shot blasting your semi-trailer in full, all corrosion and surface unevenness is removed. This is essential for effective rustproofing treatment.
The second part is where your whole semi-trailer will be cleaned, to ensure that there are no particles of blasting grit remaining.
As potential we provide your semi-trailer with optimal protection against rust (metallization). A zinc layer is added to the semi-trailer!
For ultimate adhesion a good layer of primer is essential. During this phase, your semi-trailer is provided in full with a layer of primer.
5. Spray painting
Using a WallMann, the body sprayer can apply the 2-component paint to every part of your trailer. Your semi-trailer is given the best quality paint.
6. Drying process
The final part of the process is the drying process. During the drying process your semi-trailer is located in a heated booth, which is necessary for effective adhesion of the paint.