Welcome, what can I do for you?

This lightweight 3-axle self tracking construction semi low loader is built so you can transport virtually all construction machines up to 39T. The trailer is provided with wheel wells (extra wheel opening is formed by extending the trailer) to enable the wheel loaders to be loaded lower. This trailer also has a crane arm recess to allow the boom to be transported lower. You can easily load and unload the machines with the longer slope (lower ramp angle) at the rear.

The specifications below are for a 3-axle self-tracking construction semi low loader with single extension. As you have come to expect from us, you can also get a 3-axle self-tracking construction semi low loader according to your specifications. Consider for instance ECO ramps! We will be happy to help you configure your own semi low loader. You can contact one of our employees for this at any time with no obligation.

General specifications
  • Single extendable
  • Air suspension
  • Self tracking
  • Wheel wells
  • Crane arm recess
  • App. 39 T load capacity
Brochure Specification sheet
Technical specifications
  • 18 T kingpin load
  • 30 T bogie load
  • App. 9 T tare weight
  • 870 mm bed height (loaded)
  • 200 mm high side bar
  • Chequered plate floor level with the side bar
  • Twistlock plates for detachable twistlocks 1 x 20 ft container
  • Pull out' galvanised outriggers
  • Beavertail chamfered 900x12°
  • All lines protected inside the beam